MTW Parts

Replacement Oring set for Inferno Gen 2 Solenoid

The FRAC (Fixed Rear Airline Connector) provides a hard-point airline fitting on your MTW’s sling plate, removing the need to run your airline out your grip and allowing for one-handed connecting/disconnecting of the airline. The fitting is released by pressing the button for easy disassembly of your MTW. The 3.5″ airline with integrated filter helps keep dust and debris out and fits standard MTW M4 and MTW-9.

Includes

• Fixed Rear Airline Connector (MTW-M-618)
• 3.5″ Airline with Integrated Filter for MTW M4, MTW-9 (MTW-SA-705)
• Alignment Ring (MTW-M-627)

Upgrade your Wolverine MTW with our Enhanced Polymer Dust Cover, designed for both aesthetics and functionality. Manufactured from durable yet lightweight polymer, this dust cover enhances the rifle’s look while offering a key improvement compared to the factory ejection port cover : an extended lip for easy grip. This allows for quick and effortless access to the hop-up unit, making on-the-fly adjustments smoother than ever. Perfect for MTW users who demand both style and practicality.

At Airsmiths, we’re committed to sustainability without compromising performance. All our polymer accessories are manufactured using renewable, bio-based, or recycled plastics and polymers, reducing waste and minimizing environmental impact. By choosing eco-friendly materials, we ensure our products remain durable, high-quality, and responsible - helping airsofters play with confidence while supporting a greener future.

The MTW Battery Grip powers your MTW-Spec replica with standard 3V 123 batteries! No more disconnecting and reconnecting LiPos, no more complicated recharging…simply flip a switch for instant power! Get up to five times the capacity of a standard LiPo plus a longer-lasting charge when not in use. Power up your MTW!

Features

• Uses two 3V 123 batteries (Not included)
• Fast and convenient power switch
• Streamlined live-fire tuning
• Fits MTW-Spec lower receivers
• Integrated boost circuit delivers consistent power supply
• Water resistant
• Easy install…uses standard grip screw and plugs into existing JST connector
• Recommended to use with Fixed Rear Airline Connector or WRAITH X.
• Compatible with MTW-Spec replicas

The MTW Battery Grip powers your MTW-Spec replica with standard 3V 123 batteries! No more disconnecting and reconnecting LiPos, no more complicated recharging…simply flip a switch for instant power! Get up to five times the capacity of a standard LiPo plus a longer-lasting charge when not in use. Power up your MTW!

Features

• Uses two 3V 123 batteries (Not included)
• 5x the performance (1,500 mAh)
• Fast and convenient power switch
• Streamlined live-fire tuning
• Fits MTW-Spec lower receivers
• Integrated boost circuit delivers consistent power supply
• Water resistant
• Easy install…uses standard grip screw and plugs into existing JST connector
• Supplied with Fixed Rear Airline Connector.
• Compatible with MTW-Spec replicas

Please note : if you select 'Yes' to the parts being fitted by us, you will need to arrange to have your MTW shipped to us & select 'shipping for guns' at checkout to cover the return of your MTW

NEW! From Wolverine Airsoft, We have the QUAKE MTW and INFERNO XTS Upgrade Kit

Infuse lifelike realism into your gameplay with the QUAKE MTW, the lightweight, durable recoil system specifically crafted for the MTW platform. The patent-pending, Actuated Stock System is purely HPA driven, integrating directly with the novel recoil port of the updated INFERNO XTS HPA engine to simultaneously power firing and recoil. Each shot breathes life into your the MTW, using the full weapon mass to generate authentic kick directly to your shoulder without the need for added weights. The QUAKE MTW is the ultimate upgrade for any MTW!

EXPERIENCE THE QUAKE MTW

To Experience QUAKE to its fullest in Semi and Auto, The Pre-Fitted Green (or swap to the Blue) Restrictor should be used for a higher input pressure to increase the force of the recoil alongside a lower Rate of Fire (<20rps) to enable everything to cycle fully every time. 

Check Out Wolverine's Video Here: https://youtu.be/72bsawvXhWc

Check Out Getting Started with QUAKE MTW Here: https://www.youtube.com/watch?v=mf3Jpfy8204

Features:

High Impact Recoil with up to 35lbs of force

Lightweight, Adding just 76g to the total weight of an MTW

No Additional Electronics Needed

Tuneable Recoil using internal flow reducers

Specification:

Engine Input Pressure: 60-160PSI (80-150PSI with QUAKE MTW)

Output Energy: 0.75J-2J Adjustable (Build Dependant)

ROF: 5-35RPS Adjustable (5-25RPS with QUAKE MTW Installed)

Compatibility:

Compatible without Extra Parts: MTW M4, MTW-9

Compatible with Extra Parts: MTW-308 ( 308 hardpoint Adapter Required)

NOT Compatible: MTW GEN-12 Shotgun

Please note this Upgrade Kit is not compatible with WRAITH Products, Heretic Labs Drop Stock or Heretic Labs Tank Grip

What's In the Box?

QUAKE MTW Recoil Stock

INFERNO XTS HPA Engine (Solenoid NOT Included, Use the Solenoid from your existing INFERNO GEN2)

Hard Point Adapter

Mini Airline

Red FRAC Airline for MTW M4

QD Sling PLate

Castle Nut

O-Ring Kits

User Manuals

INFERNO XTS Owners Manual

QUAKE MTW Owners Manual

Caution: This product has some teething issues when combined with a battery grip.  Wolverine are aware of a potential issue that can cause some guns to enter programming mode unexpectedly.  We recommend the use of a 7.4v LiPo Battery for best results.

Please note : if you select 'Yes' to the parts being fitted by us, you will need to arrange to have your MTW shipped to us & select 'shipping for guns' at checkout to cover the return of your MTW

NEW! From Wolverine Airsoft we have the BLINC Control Board for the MTW and Article Series

BLINC puts absolute control in your hands.

BLINC uses Bluetooth Low Energy technology to seamlessly integrate control of your Wolverine HPA engine and Acetech chronographs and tracers into one easy-to-use app with next-level features. Customize fire modes, build profiles, and adapt to any scenario in seconds. Monitor your chronograph from the same screen where you set your dwell, or eliminate the guesswork with our patent-pending autotune algorithm that can automatically tune your dwell for you.

Designed to help you get the most out of your airsoft experience, BLINC includes features like full-time sleep mode, short detection, and battery voltage monitoring—so you can stay focused on the game, not your gear.

For more information, see the Owner’s Manual

Features

Combination FCU and Trigger Board with Bluetooth® wireless connectivity

Assign any fire mode to any selector position including 1-10 burst modes, full-auto, DMR mode and binary!

Customize your ROF from 1 to 50 RPS for each fire mode

Precisely set the dwell manually or with Auto-tune when paired with a compatible Acetech device (ex. Bifrost BT, Lighter BT, or AC6000 BT)

Save your settings to custom profiles and instantly recall them later

Monitor your chronograph (Joules, FPS or MPS) and LiPo battery voltage from the home screen

Tune without the app with classic Live Fire Tuning Mode

Advanced tuning of Anti-Stiction and Optical Selector Switch position

Control multiple BLINCs, chronographs, and tracers from one app

Digital tournament lock

Short Detection

Stay up to date with board firmware updates via Bluetooth® wireless connection with the app

Includes

BLINC Bluetooth® Integrated Control Board

Contact Yoke

Please note : if you select 'Yes' to the board being fitted by us, you will need to arrange to have your MTW shipped to us & select 'shipping for guns' at checkout to cover the return of your MTW

Tournament Lock for the Unleashed MTW and Wraith X System, designed and manufactured by Airsmiths

The INFERNO XTS builds on everything that made the INFERNO Gen 2 a legend—delivering the same award-winning performance and reliability, with more forgiveness, tunability, and raw potential than ever before!

Based on the same revolutionary hybrid technology that the Gen 2 debuted almost 10 years ago —featuring our patented independent poppet and nozzle system—the XTS fine-tunes every stage of the shot cycle. Its “extended stroke” system improves hop-up air seal, enhances feeding forgiveness, and increases separation between loading and firing movements to help stabilize each BB for tighter groupings and more consistent shots. A newly engineered valve housing optimizes internal airflow, reduces air waste, and improves dwell tuning tolerance—making precise tuning more accessible in a wider range of setups.

Whether you’re pushing limits in competitive play or adapting to regional energy regulations, the INFERNO XTS gives you refined control, consistent performance, and versatile adaptability!

Features

Specs

• Input Pressure: 60-160PSI
• Min. Sealing Pressure: 30 PSI
• Output Energy: 1-3J Adjustable (build dependent)
• ROF: 5-35RPS Adjustable
• Battery Input: JST 6-8V
• Approx 3,120-4,160 per 48/3000 tank @ 1.5J on 10” stock MTW at ~90 PSI 
• Dwell: Fully Adjustable
• Electronics: Compatible with all Wolverine Airsoft Electronics
• For more information, see the Owner’s Manual

Description

Includes

• Billet upper receiver (MTW-M-247)
• Charging handle (MTW-H-208)
• Polymer dust cover (MTW-M-248)
• Pin (MTW-M-252)
• Spring (MTW-H-254)
• C-clip (MTW-H-253)
• Contact Yoke (MTW-SA-402)
• Engine retention clip (MTW-M-212)
• Feed tube Ver. 3 for M4 (MTW-M-327)
• Feed tube retention screws (MTW-H-330) x2
• Detent spring retention screw (MTW-H-147)
• Billet barrel adapter (MTW-M-249)

Maxx CNC Feed tube for MTW, Compatible with Gen 3 MTWs (Forged and Billet)

The Airsmiths Match Trigger for MTW Owners, CNC machined from 6061 T6 Aluminium, Cerakote finish, Marine Grade Stainless Steel set & retention screws, paired with steel lightweight Trigger spring.

This upgraded trigger offers a crisp, light weight pull with a positive switch engagement creating a more refined trigger response alongside a visually elegant profile.

Designed to adjust via a single set screw, the Airsmiths Match Trigger for MTW is quick and easy to install with minimal effort needed to adjust to your desired position 

Built for superior performance and designed to look good doing it.

Specifications and Data :

Trigger : CNC 6061T6 Aluminium 

Set Screw (M2) : Marine Grade Stainless Steel 

Retention Screw (M3) : Marine Grade Stainless Steel 

Trigger Spring : Heat Treated Stainless Steel 

What's Included :

1 x Airsmiths Match Trigger 

1 x Airsmiths Set / Adjustment Screw 

1 x Airsmiths Trigger Retention Screw

1 x Airsmiths Trigger Spring

Sentinel CLP – Clean, Lubricate & Protect

Sentinel CLP is an all-in-one maintenance solution designed to clean, lubricate, and protect steel components from wear and corrosion.

Whilst fantastic when used for the maintenence of Wolverine's new MTW AK platform, Sentinel CLP is equally effective on AR-style rifles, other AK variants, and real steel platforms that rely on steel moving parts and metal-on-metal contact surfaces.

The advanced formula penetrates carbon fouling, dirt, and residue while leaving behind a protective lubricating film that reduces friction, improves reliability, and helps prevent rust and corrosion during storage and use.

Whether you're maintaining an MTW AK after a hard day of skirmishing or keeping your rifle running smoothly between range sessions, Sentinel CLP simplifies your maintenance routine with one bottle that does it all.

Key Features

• Cleans carbon, dirt, and residue from steel components

• Lubricates moving metal parts to reduce friction and wear

• Protects against rust and corrosion

• Suitable for AR, AK, HPA, GBBR, and other steel-component rifles

• Improves reliability and long-term performance

• Convenient all-in-one CLP formula

Important: Sentinel CLP is designed for use on steel and other metal components. It is not intended as an O-ring lubricant and should not be used as a substitute for dedicated silicone-based lubricants where seals, O-rings, or rubber components require maintenance.

Replacement Oring set for Inferno Gen 2 Solenoid