HPA Accessories

A quick and simple solution to a problem faced by many HPA users

Notice how you're fumbling with your line trying to locate somewhere on your gear to place it whilst not in use? The last thing you want is for it to fall into the dirt or around the back of your plate carrier, only to find yourself desperately trying to reach for it when the time comes to reconnect!

The Airsmiths Easy Stow solves that problem - a small yet effective bit of kit that only takes up a single section of Molle on your plate carrier/harness. Easily stow your line when not in use in the same place, allowing for muscle memory and also the peace of mind that your line isn't vulnerable to dirt, dust or water when disconnected from your rifle

Compatible with all standard spec Molle Systems, install takes under 10 seconds!

Designed to connect to your line without pressurising, meaning no leaks when in use

Lightweight and Small Profile

Designed and Manufactured in the UK

Specifications

• Material : Nylon PA12

• H : 26mm
• W : 27mm
• D : 39mm

Please note that this product is for HPA Airsoft use only

Male QD Foster fitting to plug in to an HPA line such as the US-spec Balystik and Amped HPA lines with a 6mm macroline push-fit connector on the other side to connect directly to a Polarstar engine.

Maximum pressure: 140psi

Please note that this product is for HPA Airsoft use only

Female QD Foster fitting to plug in to an HPA line such as the US-spec Balystik and Amped HPA lines 

Reg Side

Maximum pressure: 140psi

Take the weight off your shoulders with the Heretic Labs Tank Grip. Attach an HPA tank directly into your Heretic or MTW-Spec HPA replica and you’re ready to go. Powered by the lightning-fast Wolverine Airsoft Storm Category 5 Regulator, this grip is the ultimate upgrade to dominate the speedsoft arena.

Features

• Built-in STORM Category 5 Regulator with forward-facing gauge (60-180 PSI Range)

• Convenient toolless battery access.

• Rugged design with quality moulded glass-filled nylon.

• Accepts standard HPA tanks

• Fits MTW-Spec HPA replicas

Air lines, regulators, HPLs, IGLs, AGLs and AGL90's as well as Custom HPA Builds and Player Kits are built to order. We can not guarantee same day shipment on these items at this time.

This is a conversion kit that turns your normal air rig into a dual tank rig that can fit up to two 90/4500 tanks for a fraction of the cost. The Low Profile Rig is designed with small assault packs in mind (Haley FlatPack, GMR MiniMap, Pantac MiniMap, etc). This is a very rigid setup that minimizes sagging, and slims down bulky packs. This will work on most regulators on the market, but please be advised that this WILL NOT work on the NINJA LPR V2 Regulators.

Please Note: When using this dual tank air rig you must make sure to utilize both of the same tanks with the same output pressure. For example, you can not use a 90/4500 tank with a 62/3000 tank.  Likewise, you can not use both an SLP and non-SLP tank together. We encourage to also use the same brand of tank to make sure that both tank regulators are close in specification with each other. This goes for all dual tank air rigs on the market.

Disclaimer: When purchasing ASA Plugs, they may have tooling marks from assembly or disassembly once you receive it.

Features

• Includes everything required to use 12g, 33g CO2 cartridges or standard HPA tanks.
• Rapidly change 12g CO2 cartridges with 2-start  threaded cap featuring magnetic cartridge extractor.
• Maximize your CO2 consistency with 2X larger expansion chamber.
• Built-in STORM Category 5 regulator for uncompromised performance.

Specs

• Pressure range: 60-180 psi
• Milspec buffer tube
• Output energy: 1.0 – 2.5J adjustable (build dependent)
• Approx. 200 shots per 12g cartridge
• Approx. 500 shots per 33g cartridge
• Approx. 1,000 shots per 13/3000 cu HPA tank

Includes

• WRAITH STORM Cat 5 Regulator
• Milspec Buffer Tube
• CO2 Expansion Chamber
• 12g cartridge holder and cap
• Hardpoint Adapter
• Mini Airline
• Pistol Grip Base Plate
• Allen Wrenches
• O-Ring Kit
• 2″x 3″ WRAITH X Patch

Replacement Solenoid for Wolverine Inferno Gen 2 & XTS

Introducing the worlds first HPA Armourer's Wrench, designed specifically for working on platforms like the Wolverine MTW!

Manufactured from 5mm thick Hardox400, This Armourer's Wrench will last a lifetime of use without degradation thanks too it's nominal hardness of 400 HBW.

What's different to a standard AR Wrench? Standard Armourer's Wrenches are designed to aid in the work on generic AR type rifles, and often have features that the average MTW Owner will never need or use. The HPA Armourer's Wrench is purpose built and manufactured in the UK to the Highest Standards.

Featured Tools :

- Grip Line

- Foster Fitting

- Regulator Gauge

- AR15 Castle Nut

- MTW Flash Hider Removal

- Engine Retention Clip Removal Shank

- Even a Bottle Opener!

The FRAC (Fixed Rear Airline Connector) provides a hard-point airline fitting on your MTW’s sling plate, removing the need to run your airline out your grip and allowing for one-handed connecting/disconnecting of the airline. The fitting is released by pressing the button for easy disassembly of your MTW. The 3.5″ airline with integrated filter helps keep dust and debris out and fits standard MTW M4 and MTW-9.

Includes

• Fixed Rear Airline Connector (MTW-M-618)
• 3.5″ Airline with Integrated Filter for MTW M4, MTW-9 (MTW-SA-705)
• Alignment Ring (MTW-M-627)

6mm Macro line with Polarstar Engine Side Barb Fitting pre installed.

Macro Line length is approximately 12" and too long by design so you can cut down to the ideal fitment for your ESG Grip